![]() ![]() ![]() ![]() Try replacing the cable from “LAN” to the computer. If it’s plugged into a network, take it off of the network and plug it into a computer. That cable should be plugged into your computer or network. Power but No LAN LightĪfter tracing the cable from the antenna to the POE, you should find another cable plugged into the POE into the “LAN” port. If you still have no power, that radio will need to be replaced. If everything is plugged in, try replacing the cable going from the “POE” port to the antenna. That small black POE also needs its power cable plugged into an outlet. It should be plugged into a port labeled “POE” on a small black POE box. From left to right, you will have one power light, one LAN light that should be flickering, and up to 4 signal lights. ![]() First, you will want to check the lights on the back of the radio. This removes the need for a really long cable like a direct connection. With wireless antennas, you will have one antenna in/on the building, and another on the sign. You will need to be able to reach the LED display and open it for this Please call tech support for guidance on how to do this at 24 option 2, then 2. The best way to determine this is to use a different cable and plug right into the sign using a laptop. If there is no network connection showing in your computer to change the IP address, then you may have a bad cable going to the sign. Here’s a useful article with a step by step process. The subnet should match the network or 255.255.255.0 as default if the sign cable is plugged directly into the computer’s Ethernet port or EM supplied Ethernet adapter. The last set of numbers needs to be within the range of 1-255 and should not be already used on another device if on the network. For example, if the IP address of your sign is 192.168.1.200, your computer should be set to match the range of the sign. Next you will need to make sure the IP address on your computer is within the same range as your sign. That cable is getting plugged into a computer or into a network (switch, router, etc.). Featured Case Study: IKEA of Ottawa, ON, CanadaĪ direct connection means there’s a cable coming from your sign, into your building.Digital Billboards for Out-of-Home Advertising. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |